This machine comes with 2 years warranty.

Profitec Pro 700 V2 dual boiler espresso machine. This machine has it all - commercial grade rotary pump, run off it's internal tank or plumb it, independent brew and steam boiler controlled with a digital PID and dual gauges for steam pressure and brew pressure. The latest version has bigger gauges, a stainless steel group head "mushroom" and redesigned steam/water wands and quick steam valves. It also runs at 2BAR steam pressure which stands it apart from the vast majority of "prosumer" espresso machines which run at 1.2 BAR. Higher pressure means better steam and easier, faster milk texturing.

Note: videos and some images show earlier version of model, please refer to first image for current version.

Must Have: 

The E61 Flow Control Device allows you to adjust the flow of water in your brew group to manually profile your extractions. This custom component is a stainless steel needle valve, which allows the user to vary the amount of water flowing through the group. Variable flow control allows for lengthy pre-infusion for more even saturation and extraction of your espresso. 

Similar to Profitec's existing mushroom, the flow control device is made from stainless steel to resist corrosion. The resulting changes in pressure are reflected by an included gauge which installs on the front of the group. The E61 Flow Control Device can be installed on any Profitec Espresso machine with an E61 brew group.

Technical Overview:

• Dual boiler
• PID-display for the individual temperature adjustment of both boilers
• PID-display indicates the brewing time in seconds
• E61 brew-group
• Rotary pump
• Quick Steam valves
• High-end, `no-burn´ steam and hot water wands
• Separate grid to raise cups
• Boiler and pump pressure gauges
• Stainless steel boiler with 0.75 l volume for espresso preparation
• Steam and hot water boiler in stainless steel with a 2.8L volume
• Steam boiler with separate on/off switch
• Boiler insulation
• Two heaters with 1 x 1200 Watts and 1 x 1400 Watts
• Switchable from water tank to fixed water connection
• Water tank with a 3 l volume and water tank connector
• Automatic shut-off by way of low water volume sensor
• Large drip tray with a 1 l capacity
• Removeable cup tray
• Voltage 230V
• Current 10A
• Weight 31 kg / 68.4 lbs
• Dimensions W x D x H: 340 x 475 x 420 mm without portafilter
• 340 x 590 x 420 mm with portafilter
• Weight 31kg

In the box:

• 1 Porta filter for one cup
• 1 Porta filter for two cups
• 1 1-cup filter 7g
• 1 2-cup filter 14g
• 1 Blind filter
• 1 Metal Tamper
• 1 Cleaning brush
• 1 Instruction manual

*Please Note: If selecting the E61 Flow Rate Regulator option, please allow for a 2-3 day delay on dispatch as this part must be fitted by our workshop technicians. If selecting the Powdercoat option a delay of 7-10 business days may apply as the job is done upon request.

 What size tamper will I need for this machine?

The nominal tamper size for this machine is 58mm, however you will get the best fit in your machine's basket by purchasing a 58.55mm PreciseFit tamper.

Country of origin

Germany